Li
/
enablepsstore
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 1 Wiki Activity

Add files via upload

This commit is contained in:
Silica 2017-08-08 15:56:02 +12:00 committed by GitHub
parent 6e0144bc57
commit 480b12e6ad
21 changed files with 163547 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
CMakeLists.txt Normal file
View File

@ -0,0 +1,37 @@
cmake_minimum_required(VERSION 2.8)
set(CMAKE_SYSTEM_NAME "Generic")
set(CMAKE_C_COMPILER "arm-vita-eabi-gcc")
set(CMAKE_CXX_COMPILER "arm-vita-eabi-g++")
project(EnablePStore)
set(CMAKE_C_FLAGS "-Wl,-q -O3 -std=c99")
add_definitions(-DSQLITE_OS_OTHER=1 -DSQLITE_TEMP_STORE=3 -DSQLITE_THREADSAFE=0)
include_directories(
sqlite-3.6.23.1
)
add_executable(${PROJECT_NAME}.elf
src/main.c
src/font.c
src/graphics.c
src/vita_sqlite.c
sqlite-3.6.23.1/sqlite3.c
)
target_link_libraries(${PROJECT_NAME}.elf
-lSceDisplay_stub
-lSceCtrl_stub
-lSceSysmodule_stub
-lScePower_stub
)
add_custom_target(${PROJECT_NAME}.vpk ALL
COMMAND vita-elf-create ${PROJECT_NAME}.elf ${PROJECT_NAME}.velf
COMMAND vita-make-fself ${PROJECT_NAME}.velf eboot.bin
COMMAND vita-mksfoex -s TITLE_ID=PSTO00001 "Enable PS Store" param.sfo
)
add_dependencies(${PROJECT_NAME}.vpk ${PROJECT_NAME}.elf)

236
sqlite-3.6.23.1/INSTALL Normal file
View File

@ -0,0 +1,236 @@
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script). Here is a another example:
/bin/bash ./configure CONFIG_SHELL=/bin/bash
Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
configuration-related scripts to be executed by `/bin/bash'.
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

19
sqlite-3.6.23.1/Makefile.am Normal file
View File

@ -0,0 +1,19 @@
AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
lib_LTLIBRARIES = libsqlite3.la
libsqlite3_la_SOURCES = sqlite3.c
libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
bin_PROGRAMS = sqlite3
sqlite3_SOURCES = shell.c sqlite3.h
sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
include_HEADERS = sqlite3.h sqlite3ext.h
EXTRA_DIST = sqlite3.pc sqlite3.1
pkgconfigdir = ${libdir}/pkgconfig
pkgconfig_DATA = sqlite3.pc
man_MANS = sqlite3.1

731
sqlite-3.6.23.1/Makefile.in Normal file
View File

@ -0,0 +1,731 @@
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
bin_PROGRAMS = sqlite3$(EXEEXT)
DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/sqlite3.pc.in $(top_srcdir)/configure INSTALL \
config.guess config.sub depcomp install-sh ltmain.sh missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = sqlite3.pc
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \
"$(DESTDIR)$(includedir)"
libLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(lib_LTLIBRARIES)
libsqlite3_la_LIBADD =
am_libsqlite3_la_OBJECTS = sqlite3.lo
libsqlite3_la_OBJECTS = $(am_libsqlite3_la_OBJECTS)
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS)
am_sqlite3_OBJECTS = shell.$(OBJEXT)
sqlite3_OBJECTS = $(am_sqlite3_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libsqlite3_la_SOURCES) $(sqlite3_SOURCES)
DIST_SOURCES = $(libsqlite3_la_SOURCES) $(sqlite3_SOURCES)
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
includeHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(include_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_CFLAGS = @BUILD_CFLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXTENSION_FLAGS = @DYNAMIC_EXTENSION_FLAGS@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
GREP = @GREP@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
THREADSAFE_FLAGS = @THREADSAFE_FLAGS@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
lib_LTLIBRARIES = libsqlite3.la
libsqlite3_la_SOURCES = sqlite3.c
libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
sqlite3_SOURCES = shell.c sqlite3.h
sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
include_HEADERS = sqlite3.h sqlite3ext.h
EXTRA_DIST = sqlite3.pc sqlite3.1
pkgconfigdir = ${libdir}/pkgconfig
pkgconfig_DATA = sqlite3.pc
man_MANS = sqlite3.1
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
sqlite3.pc: $(top_builddir)/config.status $(srcdir)/sqlite3.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
$(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
else :; fi; \
done
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
p=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
$(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
done
clean-libLTLIBRARIES:
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libsqlite3.la: $(libsqlite3_la_OBJECTS) $(libsqlite3_la_DEPENDENCIES)
$(LINK) -rpath $(libdir) $(libsqlite3_la_LDFLAGS) $(libsqlite3_la_OBJECTS) $(libsqlite3_la_LIBADD) $(LIBS)
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
|| test -f $$p1 \
; then \
f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \
done
clean-binPROGRAMS:
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
sqlite3$(EXEEXT): $(sqlite3_OBJECTS) $(sqlite3_DEPENDENCIES)
@rm -f sqlite3$(EXEEXT)
$(LINK) $(sqlite3_LDFLAGS) $(sqlite3_OBJECTS) $(sqlite3_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/shell.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sqlite3.Plo@am__quote@
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
install-man1: $(man1_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
done
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
done
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
$(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
install-includeHEADERS: $(include_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
@list='$(include_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
$(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
done
uninstall-includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(include_HEADERS)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
rm -f "$(DESTDIR)$(includedir)/$$f"; \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/.
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
install-binPROGRAMS: install-libLTLIBRARIES
installdirs:
for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-libtool distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am: install-includeHEADERS install-man \
install-pkgconfigDATA
install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
install-info: install-info-am
install-man: install-man1
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
uninstall-info-am uninstall-libLTLIBRARIES uninstall-man \
uninstall-pkgconfigDATA
uninstall-man: uninstall-man1
.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-binPROGRAMS install-data install-data-am install-exec \
install-exec-am install-includeHEADERS install-info \
install-info-am install-libLTLIBRARIES install-man \
install-man1 install-pkgconfigDATA install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags uninstall uninstall-am uninstall-binPROGRAMS \
uninstall-includeHEADERS uninstall-info-am \
uninstall-libLTLIBRARIES uninstall-man uninstall-man1 \
uninstall-pkgconfigDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

32
sqlite-3.6.23.1/README Normal file
View File

@ -0,0 +1,32 @@
This package contains:
* the SQLite library amalgamation (single file) source code distribution,
* the shell.c file used to build the sqlite3 shell too, and
* the sqlite3.h and sqlite3ext.h header files required to link programs
and sqlite extensions against the installed libary.
* autoconf/automake installation infrastucture.
The generic installation instructions for autoconf/automake are found
in the INSTALL file.
The following SQLite specific boolean options are supported:
--enable-readline use readline in shell tool [default=yes]
--enable-threadsafe build a thread-safe library [default=yes]
--enable-dynamic-extensions support loadable extensions [default=yes]
The default value for the CFLAGS variable (options passed to the C
compiler) includes debugging symbols in the build, resulting in larger
binaries than are necessary. Override it on the configure command
line like this:
$ CFLAGS="-Os" ./configure
to produce a smaller installation footprint.
Other SQLite compilation parameters can also be set using CFLAGS. For
example:
$ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure

7227
sqlite-3.6.23.1/aclocal.m4 vendored Normal file
View File

File diff suppressed because it is too large Load Diff

1463
sqlite-3.6.23.1/config.guess vendored Normal file
View File

File diff suppressed because it is too large Load Diff

1579
sqlite-3.6.23.1/config.sub vendored Normal file
View File

File diff suppressed because it is too large Load Diff

22530
sqlite-3.6.23.1/configure vendored Normal file
View File

File diff suppressed because it is too large Load Diff

104
sqlite-3.6.23.1/configure.ac Normal file
View File

@ -0,0 +1,104 @@
#-----------------------------------------------------------------------
# Supports the following non-standard switches.
#
# --enable-threadsafe
# --enable-readline
# --enable-dynamic-extensions
#
AC_PREREQ(2.61)
AC_INIT(sqlite, 3.6.23.1, http://www.sqlite.org)
AC_CONFIG_SRCDIR([sqlite3.c])
# Use automake.
AM_INIT_AUTOMAKE([foreign])
AC_SYS_LARGEFILE
# Check for required programs.
AC_PROG_CC
AC_PROG_RANLIB
AC_PROG_LIBTOOL
# Check for library functions that SQLite can optionally use.
AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
AC_CONFIG_FILES([Makefile sqlite3.pc])
AC_SUBST(BUILD_CFLAGS)
#-----------------------------------------------------------------------
# --enable-readline
#
AC_ARG_ENABLE(readline, [AS_HELP_STRING(
[--enable-readline],
[use readline in shell tool (yes, no) [default=yes]])],
[], [enable_readline=yes])
if test x"$enable_readline" != xno ; then
sLIBS=$LIBS
LIBS=""
AC_SEARCH_LIBS(tgetent, curses, [], [])
AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no])
AC_CHECK_FUNCS(readline, [], [])
READLINE_LIBS=$LIBS
LIBS=$sLIBS
fi
AC_SUBST(READLINE_LIBS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-threadsafe
#
AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
[--enable-threadsafe], [build a thread-safe library [default=yes]])],
[], [enable_threadsafe=yes])
THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
if test x"$enable_threadsafe" != "xno"; then
THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=1
AC_SEARCH_LIBS(pthread_create, pthread)
fi
AC_SUBST(THREADSAFE_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-dynamic-extensions
#
AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
[--enable-dynamic-extensions], [support loadable extensions [default=yes]])],
[], [enable_dynamic_extensions=yes])
if test x"$enable_dynamic_extensions" != "xno"; then
AC_SEARCH_LIBS(dlopen, dl)
else
DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
fi
AC_MSG_CHECKING([for whether to support dynamic extensions])
AC_MSG_RESULT($enable_dynamic_extensions)
AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# UPDATE: Maybe it's better if users just set CFLAGS before invoking
# configure. This option doesn't really add much...
#
# --enable-tempstore
#
# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
# [--enable-tempstore],
# [in-memory temporary tables (never, no, yes, always) [default=no]])],
# [], [enable_tempstore=no])
# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
# case "$enable_tempstore" in
# never ) TEMP_STORE=0 ;;
# no ) TEMP_STORE=1 ;;
# always ) TEMP_STORE=3 ;;
# yes ) TEMP_STORE=3 ;;
# * )
# TEMP_STORE=1
# enable_tempstore=yes
# ;;
# esac
# AC_MSG_RESULT($enable_tempstore)
# AC_SUBST(TEMP_STORE)
#-----------------------------------------------------------------------
AC_OUTPUT

530
sqlite-3.6.23.1/depcomp Normal file
View File

@ -0,0 +1,530 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2005-07-09.11
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by `PROGRAMS ARGS'.
object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> $depfile
echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
"$@" -Wc,-M
else
"$@" -M
fi
stat=$?
if test -f "$tmpdepfile"; then :
else
stripped=`echo "$stripped" | sed 's,^.*/,,'`
tmpdepfile="$stripped.u"
fi
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
if test -f "$tmpdepfile"; then
outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
icc)
# Intel's C compiler understands `-MD -MF file'. However on
# icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
# which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
# With Tru64 cc, shared objects can also be used to make a
# static library. This mecanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
# compilations output dependencies in in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
tmpdepfile2=$dir$base.o.d # libtool 1.5
tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.o.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
tmpdepfile4=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no
for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E |
sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
"$@" || exit $?
IFS=" "
for arg
do
case "$arg" in
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

323
sqlite-3.6.23.1/install-sh Normal file
View File

@ -0,0 +1,323 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# Skip lots of stat calls in the usual case.
if test ! -d "$dstdir"; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
shift
IFS=$oIFS
pathcomp=
while test $# -ne 0 ; do
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
$doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dstdir/$dstfile"; then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit 0
}
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

6930
sqlite-3.6.23.1/ltmain.sh Normal file
View File

File diff suppressed because it is too large Load Diff

360
sqlite-3.6.23.1/missing Normal file
View File

@ -0,0 +1,360 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
scriptversion=2005-06-08.21
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
msg="missing on your system"
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
tar)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
exit 1
fi
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file
;;
tar)
shift
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

2635
sqlite-3.6.23.1/shell.c Normal file
View File

File diff suppressed because it is too large Load Diff

229
sqlite-3.6.23.1/sqlite3.1 Normal file
View File

@ -0,0 +1,229 @@
.\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH SQLITE3 1 "Mon Apr 15 23:49:17 2002"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
.B sqlite3
\- A command line interface for SQLite version 3
.SH SYNOPSIS
.B sqlite3
.RI [ options ]
.RI [ databasefile ]
.RI [ SQL ]
.SH SUMMARY
.PP
.B sqlite3
is a terminal-based front-end to the SQLite library that can evaluate
queries interactively and display the results in multiple formats.
.B sqlite3
can also be used within shell scripts and other applications to provide
batch processing features.
.SH DESCRIPTION
To start a
.B sqlite3
interactive session, invoke the
.B sqlite3
command and optionally provide the name of a database file. If the
database file does not exist, it will be created. If the database file
does exist, it will be opened.
For example, to create a new database file named "mydata.db", create
a table named "memos" and insert a couple of records into that table:
.sp
$
.B sqlite3 mydata.db
.br
SQLite version 3.1.3
.br
Enter ".help" for instructions
.br
sqlite>
.B create table memos(text, priority INTEGER);
.br
sqlite>
.B insert into memos values('deliver project description', 10);
.br
sqlite>
.B insert into memos values('lunch with Christine', 100);
.br
sqlite>
.B select * from memos;
.br
deliver project description|10
.br
lunch with Christine|100
.br
sqlite>
.sp
If no database name is supplied, the ATTACH sql command can be used
to attach to existing or create new database files. ATTACH can also
be used to attach to multiple databases within the same interactive
session. This is useful for migrating data between databases,
possibly changing the schema along the way.
Optionally, a SQL statement or set of SQL statements can be supplied as
a single argument. Multiple statements should be separated by
semi-colons.
For example:
.sp
$
.B sqlite3 -line mydata.db 'select * from memos where priority > 20;'
.br
text = lunch with Christine
.br
priority = 100
.br
.sp
.SS SQLITE META-COMMANDS
.PP
The interactive interpreter offers a set of meta-commands that can be
used to control the output format, examine the currently attached
database files, or perform administrative operations upon the
attached databases (such as rebuilding indices). Meta-commands are
always prefixed with a dot (.).
A list of available meta-commands can be viewed at any time by issuing
the '.help' command. For example:
.sp
sqlite>
.B .help
.nf
.cc |
.databases List names and files of attached databases
.dump ?TABLE? ... Dump the database in an SQL text format
.echo ON|OFF Turn command echo on or off
.exit Exit this program
.explain ON|OFF Turn output mode suitable for EXPLAIN on or off.
.header(s) ON|OFF Turn display of headers on or off
.help Show this message
.import FILE TABLE Import data from FILE into TABLE
.indices TABLE Show names of all indices on TABLE
.mode MODE ?TABLE? Set output mode where MODE is one of:
csv Comma-separated values
column Left-aligned columns. (See .width)
html HTML <table> code
insert SQL insert statements for TABLE
line One value per line
list Values delimited by .separator string
tabs Tab-separated values
tcl TCL list elements
.nullvalue STRING Print STRING in place of NULL values
.output FILENAME Send output to FILENAME
.output stdout Send output to the screen
.prompt MAIN CONTINUE Replace the standard prompts
.quit Exit this program
.read FILENAME Execute SQL in FILENAME
.schema ?TABLE? Show the CREATE statements
.separator STRING Change separator used by output mode and .import
.show Show the current values for various settings
.tables ?PATTERN? List names of tables matching a LIKE pattern
.timeout MS Try opening locked tables for MS milliseconds
.width NUM NUM ... Set column widths for "column" mode
sqlite>
|cc .
.sp
.fi
.SH OPTIONS
.B sqlite3
has the following options:
.TP
.BI \-init\ file
Read and execute commands from
.I file
, which can contain a mix of SQL statements and meta-commands.
.TP
.B \-echo
Print commands before execution.
.TP
.B \-[no]header
Turn headers on or off.
.TP
.B \-column
Query results will be displayed in a table like form, using
whitespace characters to separate the columns and align the
output.
.TP
.B \-html
Query results will be output as simple HTML tables.
.TP
.B \-line
Query results will be displayed with one value per line, rows
separated by a blank line. Designed to be easily parsed by
scripts or other programs
.TP
.B \-list
Query results will be displayed with the separator (|, by default)
character between each field value. The default.
.TP
.BI \-separator\ separator
Set output field separator. Default is '|'.
.TP
.BI \-nullvalue\ string
Set string used to represent NULL values. Default is ''
(empty string).
.TP
.B \-version
Show SQLite version.
.TP
.B \-help
Show help on options and exit.
.SH INIT FILE
.B sqlite3
reads an initialization file to set the configuration of the
interactive environment. Throughout initialization, any previously
specified setting can be overridden. The sequence of initialization is
as follows:
o The default configuration is established as follows:
.sp
.nf
.cc |
mode = LIST
separator = "|"
main prompt = "sqlite> "
continue prompt = " ...> "
|cc .
.sp
.fi
o If the file
.B ~/.sqliterc
exists, it is processed first.
can be found in the user's home directory, it is
read and processed. It should generally only contain meta-commands.
o If the -init option is present, the specified file is processed.
o All other command line options are processed.
.SH SEE ALSO
http://www.sqlite.org/
.br
The sqlite-doc package
.SH AUTHOR
This manual page was originally written by Andreas Rottmann
<rotty@debian.org>, for the Debian GNU/Linux system (but may be used
by others). It was subsequently revised by Bill Bumgarner <bbum@mac.com>.

112444
sqlite-3.6.23.1/sqlite3.c Normal file
View File

File diff suppressed because it is too large Load Diff

5734
sqlite-3.6.23.1/sqlite3.h Normal file
View File

File diff suppressed because it is too large Load Diff

13
sqlite-3.6.23.1/sqlite3.pc Normal file
View File

@ -0,0 +1,13 @@
# Package Information for pkg-config
prefix=/usr/local
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include
Name: SQLite
Description: SQL database engine
Version: 3.6.23.1
Libs: -L${libdir} -lsqlite3
Libs.private: -ldl -lpthread
Cflags: -I${includedir}

13
sqlite-3.6.23.1/sqlite3.pc.in Normal file
View File

@ -0,0 +1,13 @@
# Package Information for pkg-config
prefix=@prefix@
exec_prefix=@exec_prefix@
libdir=@libdir@
includedir=@includedir@
Name: SQLite
Description: SQL database engine
Version: @PACKAGE_VERSION@
Libs: -L${libdir} -lsqlite3
Libs.private: @LIBS@
Cflags: -I${includedir}

378
sqlite-3.6.23.1/sqlite3ext.h Normal file
View File

@ -0,0 +1,378 @@
/*
** 2006 June 7
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
**
** May you do good and not evil.
** May you find forgiveness for yourself and forgive others.
** May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the SQLite interface for use by
** shared libraries that want to be imported as extensions into
** an SQLite instance. Shared libraries that intend to be loaded
** as extensions by SQLite should #include this file instead of
** sqlite3.h.
*/
#ifndef _SQLITE3EXT_H_
#define _SQLITE3EXT_H_
#include "sqlite3.h"
typedef struct sqlite3_api_routines sqlite3_api_routines;
/*
** The following structure holds pointers to all of the SQLite API
** routines.
**
** WARNING: In order to maintain backwards compatibility, add new
** interfaces to the end of this structure only. If you insert new
** interfaces in the middle of this structure, then older different
** versions of SQLite will not be able to load each others' shared
** libraries!
*/
struct sqlite3_api_routines {
void * (*aggregate_context)(sqlite3_context*,int nBytes);
int (*aggregate_count)(sqlite3_context*);
int (*bind_blob)(sqlite3_stmt*,int,const void*,int n,void(*)(void*));
int (*bind_double)(sqlite3_stmt*,int,double);
int (*bind_int)(sqlite3_stmt*,int,int);
int (*bind_int64)(sqlite3_stmt*,int,sqlite_int64);
int (*bind_null)(sqlite3_stmt*,int);
int (*bind_parameter_count)(sqlite3_stmt*);
int (*bind_parameter_index)(sqlite3_stmt*,const char*zName);
const char * (*bind_parameter_name)(sqlite3_stmt*,int);
int (*bind_text)(sqlite3_stmt*,int,const char*,int n,void(*)(void*));
int (*bind_text16)(sqlite3_stmt*,int,const void*,int,void(*)(void*));
int (*bind_value)(sqlite3_stmt*,int,const sqlite3_value*);
int (*busy_handler)(sqlite3*,int(*)(void*,int),void*);
int (*busy_timeout)(sqlite3*,int ms);
int (*changes)(sqlite3*);
int (*close)(sqlite3*);
int (*collation_needed)(sqlite3*,void*,void(*)(void*,sqlite3*,int eTextRep,const char*));
int (*collation_needed16)(sqlite3*,void*,void(*)(void*,sqlite3*,int eTextRep,const void*));
const void * (*column_blob)(sqlite3_stmt*,int iCol);
int (*column_bytes)(sqlite3_stmt*,int iCol);
int (*column_bytes16)(sqlite3_stmt*,int iCol);
int (*column_count)(sqlite3_stmt*pStmt);
const char * (*column_database_name)(sqlite3_stmt*,int);
const void * (*column_database_name16)(sqlite3_stmt*,int);
const char * (*column_decltype)(sqlite3_stmt*,int i);
const void * (*column_decltype16)(sqlite3_stmt*,int);
double (*column_double)(sqlite3_stmt*,int iCol);
int (*column_int)(sqlite3_stmt*,int iCol);
sqlite_int64 (*column_int64)(sqlite3_stmt*,int iCol);
const char * (*column_name)(sqlite3_stmt*,int);
const void * (*column_name16)(sqlite3_stmt*,int);
const char * (*column_origin_name)(sqlite3_stmt*,int);
const void * (*column_origin_name16)(sqlite3_stmt*,int);
const char * (*column_table_name)(sqlite3_stmt*,int);
const void * (*column_table_name16)(sqlite3_stmt*,int);
const unsigned char * (*column_text)(sqlite3_stmt*,int iCol);
const void * (*column_text16)(sqlite3_stmt*,int iCol);
int (*column_type)(sqlite3_stmt*,int iCol);
sqlite3_value* (*column_value)(sqlite3_stmt*,int iCol);
void * (*commit_hook)(sqlite3*,int(*)(void*),void*);
int (*complete)(const char*sql);
int (*complete16)(const void*sql);
int (*create_collation)(sqlite3*,const char*,int,void*,int(*)(void*,int,const void*,int,const void*));
int (*create_collation16)(sqlite3*,const void*,int,void*,int(*)(void*,int,const void*,int,const void*));
int (*create_function)(sqlite3*,const char*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*));
int (*create_function16)(sqlite3*,const void*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*));
int (*create_module)(sqlite3*,const char*,const sqlite3_module*,void*);
int (*data_count)(sqlite3_stmt*pStmt);
sqlite3 * (*db_handle)(sqlite3_stmt*);
int (*declare_vtab)(sqlite3*,const char*);
int (*enable_shared_cache)(int);
int (*errcode)(sqlite3*db);
const char * (*errmsg)(sqlite3*);
const void * (*errmsg16)(sqlite3*);
int (*exec)(sqlite3*,const char*,sqlite3_callback,void*,char**);
int (*expired)(sqlite3_stmt*);
int (*finalize)(sqlite3_stmt*pStmt);
void (*free)(void*);
void (*free_table)(char**result);
int (*get_autocommit)(sqlite3*);
void * (*get_auxdata)(sqlite3_context*,int);
int (*get_table)(sqlite3*,const char*,char***,int*,int*,char**);
int (*global_recover)(void);
void (*interruptx)(sqlite3*);
sqlite_int64 (*last_insert_rowid)(sqlite3*);
const char * (*libversion)(void);
int (*libversion_number)(void);
void *(*malloc)(int);
char * (*mprintf)(const char*,...);
int (*open)(const char*,sqlite3**);
int (*open16)(const void*,sqlite3**);
int (*prepare)(sqlite3*,const char*,int,sqlite3_stmt**,const char**);
int (*prepare16)(sqlite3*,const void*,int,sqlite3_stmt**,const void**);
void * (*profile)(sqlite3*,void(*)(void*,const char*,sqlite_uint64),void*);
void (*progress_handler)(sqlite3*,int,int(*)(void*),void*);
void *(*realloc)(void*,int);
int (*reset)(sqlite3_stmt*pStmt);
void (*result_blob)(sqlite3_context*,const void*,int,void(*)(void*));
void (*result_double)(sqlite3_context*,double);
void (*result_error)(sqlite3_context*,const char*,int);
void (*result_error16)(sqlite3_context*,const void*,int);
void (*result_int)(sqlite3_context*,int);
void (*result_int64)(sqlite3_context*,sqlite_int64);
void (*result_null)(sqlite3_context*);
void (*result_text)(sqlite3_context*,const char*,int,void(*)(void*));
void (*result_text16)(sqlite3_context*,const void*,int,void(*)(void*));
void (*result_text16be)(sqlite3_context*,const void*,int,void(*)(void*));
void (*result_text16le)(sqlite3_context*,const void*,int,void(*)(void*));
void (*result_value)(sqlite3_context*,sqlite3_value*);
void * (*rollback_hook)(sqlite3*,void(*)(void*),void*);
int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*,const char*,const char*),void*);
void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*));
char * (*snprintf)(int,char*,const char*,...);
int (*step)(sqlite3_stmt*);
int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*,char const**,char const**,int*,int*,int*);
void (*thread_cleanup)(void);
int (*total_changes)(sqlite3*);
void * (*trace)(sqlite3*,void(*xTrace)(void*,const char*),void*);
int (*transfer_bindings)(sqlite3_stmt*,sqlite3_stmt*);
void * (*update_hook)(sqlite3*,void(*)(void*,int ,char const*,char const*,sqlite_int64),void*);
void * (*user_data)(sqlite3_context*);
const void * (*value_blob)(sqlite3_value*);
int (*value_bytes)(sqlite3_value*);
int (*value_bytes16)(sqlite3_value*);
double (*value_double)(sqlite3_value*);
int (*value_int)(sqlite3_value*);
sqlite_int64 (*value_int64)(sqlite3_value*);
int (*value_numeric_type)(sqlite3_value*);
const unsigned char * (*value_text)(sqlite3_value*);
const void * (*value_text16)(sqlite3_value*);
const void * (*value_text16be)(sqlite3_value*);
const void * (*value_text16le)(sqlite3_value*);
int (*value_type)(sqlite3_value*);
char *(*vmprintf)(const char*,va_list);
/* Added ??? */
int (*overload_function)(sqlite3*, const char *zFuncName, int nArg);
/* Added by 3.3.13 */
int (*prepare_v2)(sqlite3*,const char*,int,sqlite3_stmt**,const char**);
int (*prepare16_v2)(sqlite3*,const void*,int,sqlite3_stmt**,const void**);
int (*clear_bindings)(sqlite3_stmt*);
/* Added by 3.4.1 */
int (*create_module_v2)(sqlite3*,const char*,const sqlite3_module*,void*,void (*xDestroy)(void *));
/* Added by 3.5.0 */
int (*bind_zeroblob)(sqlite3_stmt*,int,int);
int (*blob_bytes)(sqlite3_blob*);
int (*blob_close)(sqlite3_blob*);
int (*blob_open)(sqlite3*,const char*,const char*,const char*,sqlite3_int64,int,sqlite3_blob**);
int (*blob_read)(sqlite3_blob*,void*,int,int);
int (*blob_write)(sqlite3_blob*,const void*,int,int);
int (*create_collation_v2)(sqlite3*,const char*,int,void*,int(*)(void*,int,const void*,int,const void*),void(*)(void*));
int (*file_control)(sqlite3*,const char*,int,void*);
sqlite3_int64 (*memory_highwater)(int);
sqlite3_int64 (*memory_used)(void);
sqlite3_mutex *(*mutex_alloc)(int);
void (*mutex_enter)(sqlite3_mutex*);
void (*mutex_free)(sqlite3_mutex*);
void (*mutex_leave)(sqlite3_mutex*);
int (*mutex_try)(sqlite3_mutex*);
int (*open_v2)(const char*,sqlite3**,int,const char*);
int (*release_memory)(int);
void (*result_error_nomem)(sqlite3_context*);
void (*result_error_toobig)(sqlite3_context*);
int (*sleep)(int);
void (*soft_heap_limit)(int);
sqlite3_vfs *(*vfs_find)(const char*);
int (*vfs_register)(sqlite3_vfs*,int);
int (*vfs_unregister)(sqlite3_vfs*);
int (*xthreadsafe)(void);
void (*result_zeroblob)(sqlite3_context*,int);
void (*result_error_code)(sqlite3_context*,int);
int (*test_control)(int, ...);
void (*randomness)(int,void*);
sqlite3 *(*context_db_handle)(sqlite3_context*);
int (*extended_result_codes)(sqlite3*,int);
int (*limit)(sqlite3*,int,int);
sqlite3_stmt *(*next_stmt)(sqlite3*,sqlite3_stmt*);
const char *(*sql)(sqlite3_stmt*);
int (*status)(int,int*,int*,int);
};
/*
** The following macros redefine the API routines so that they are
** redirected throught the global sqlite3_api structure.
**
** This header file is also used by the loadext.c source file
** (part of the main SQLite library - not an extension) so that
** it can get access to the sqlite3_api_routines structure
** definition. But the main library does not want to redefine
** the API. So the redefinition macros are only valid if the
** SQLITE_CORE macros is undefined.
*/
#ifndef SQLITE_CORE
#define sqlite3_aggregate_context sqlite3_api->aggregate_context
#ifndef SQLITE_OMIT_DEPRECATED
#define sqlite3_aggregate_count sqlite3_api->aggregate_count
#endif
#define sqlite3_bind_blob sqlite3_api->bind_blob
#define sqlite3_bind_double sqlite3_api->bind_double
#define sqlite3_bind_int sqlite3_api->bind_int
#define sqlite3_bind_int64 sqlite3_api->bind_int64
#define sqlite3_bind_null sqlite3_api->bind_null
#define sqlite3_bind_parameter_count sqlite3_api->bind_parameter_count
#define sqlite3_bind_parameter_index sqlite3_api->bind_parameter_index
#define sqlite3_bind_parameter_name sqlite3_api->bind_parameter_name
#define sqlite3_bind_text sqlite3_api->bind_text
#define sqlite3_bind_text16 sqlite3_api->bind_text16
#define sqlite3_bind_value sqlite3_api->bind_value
#define sqlite3_busy_handler sqlite3_api->busy_handler
#define sqlite3_busy_timeout sqlite3_api->busy_timeout
#define sqlite3_changes sqlite3_api->changes
#define sqlite3_close sqlite3_api->close
#define sqlite3_collation_needed sqlite3_api->collation_needed
#define sqlite3_collation_needed16 sqlite3_api->collation_needed16
#define sqlite3_column_blob sqlite3_api->column_blob
#define sqlite3_column_bytes sqlite3_api->column_bytes
#define sqlite3_column_bytes16 sqlite3_api->column_bytes16
#define sqlite3_column_count sqlite3_api->column_count
#define sqlite3_column_database_name sqlite3_api->column_database_name
#define sqlite3_column_database_name16 sqlite3_api->column_database_name16
#define sqlite3_column_decltype sqlite3_api->column_decltype
#define sqlite3_column_decltype16 sqlite3_api->column_decltype16
#define sqlite3_column_double sqlite3_api->column_double
#define sqlite3_column_int sqlite3_api->column_int
#define sqlite3_column_int64 sqlite3_api->column_int64
#define sqlite3_column_name sqlite3_api->column_name
#define sqlite3_column_name16 sqlite3_api->column_name16
#define sqlite3_column_origin_name sqlite3_api->column_origin_name
#define sqlite3_column_origin_name16 sqlite3_api->column_origin_name16
#define sqlite3_column_table_name sqlite3_api->column_table_name
#define sqlite3_column_table_name16 sqlite3_api->column_table_name16
#define sqlite3_column_text sqlite3_api->column_text
#define sqlite3_column_text16 sqlite3_api->column_text16
#define sqlite3_column_type sqlite3_api->column_type
#define sqlite3_column_value sqlite3_api->column_value
#define sqlite3_commit_hook sqlite3_api->commit_hook
#define sqlite3_complete sqlite3_api->complete
#define sqlite3_complete16 sqlite3_api->complete16
#define sqlite3_create_collation sqlite3_api->create_collation
#define sqlite3_create_collation16 sqlite3_api->create_collation16
#define sqlite3_create_function sqlite3_api->create_function
#define sqlite3_create_function16 sqlite3_api->create_function16
#define sqlite3_create_module sqlite3_api->create_module
#define sqlite3_create_module_v2 sqlite3_api->create_module_v2
#define sqlite3_data_count sqlite3_api->data_count
#define sqlite3_db_handle sqlite3_api->db_handle
#define sqlite3_declare_vtab sqlite3_api->declare_vtab
#define sqlite3_enable_shared_cache sqlite3_api->enable_shared_cache
#define sqlite3_errcode sqlite3_api->errcode
#define sqlite3_errmsg sqlite3_api->errmsg
#define sqlite3_errmsg16 sqlite3_api->errmsg16
#define sqlite3_exec sqlite3_api->exec
#ifndef SQLITE_OMIT_DEPRECATED
#define sqlite3_expired sqlite3_api->expired
#endif
#define sqlite3_finalize sqlite3_api->finalize
#define sqlite3_free sqlite3_api->free
#define sqlite3_free_table sqlite3_api->free_table
#define sqlite3_get_autocommit sqlite3_api->get_autocommit
#define sqlite3_get_auxdata sqlite3_api->get_auxdata
#define sqlite3_get_table sqlite3_api->get_table
#ifndef SQLITE_OMIT_DEPRECATED
#define sqlite3_global_recover sqlite3_api->global_recover
#endif
#define sqlite3_interrupt sqlite3_api->interruptx
#define sqlite3_last_insert_rowid sqlite3_api->last_insert_rowid
#define sqlite3_libversion sqlite3_api->libversion
#define sqlite3_libversion_number sqlite3_api->libversion_number
#define sqlite3_malloc sqlite3_api->malloc
#define sqlite3_mprintf sqlite3_api->mprintf
#define sqlite3_open sqlite3_api->open
#define sqlite3_open16 sqlite3_api->open16
#define sqlite3_prepare sqlite3_api->prepare
#define sqlite3_prepare16 sqlite3_api->prepare16
#define sqlite3_prepare_v2 sqlite3_api->prepare_v2
#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2
#define sqlite3_profile sqlite3_api->profile
#define sqlite3_progress_handler sqlite3_api->progress_handler
#define sqlite3_realloc sqlite3_api->realloc
#define sqlite3_reset sqlite3_api->reset
#define sqlite3_result_blob sqlite3_api->result_blob
#define sqlite3_result_double sqlite3_api->result_double
#define sqlite3_result_error sqlite3_api->result_error
#define sqlite3_result_error16 sqlite3_api->result_error16
#define sqlite3_result_int sqlite3_api->result_int
#define sqlite3_result_int64 sqlite3_api->result_int64
#define sqlite3_result_null sqlite3_api->result_null
#define sqlite3_result_text sqlite3_api->result_text
#define sqlite3_result_text16 sqlite3_api->result_text16
#define sqlite3_result_text16be sqlite3_api->result_text16be
#define sqlite3_result_text16le sqlite3_api->result_text16le
#define sqlite3_result_value sqlite3_api->result_value
#define sqlite3_rollback_hook sqlite3_api->rollback_hook
#define sqlite3_set_authorizer sqlite3_api->set_authorizer
#define sqlite3_set_auxdata sqlite3_api->set_auxdata
#define sqlite3_snprintf sqlite3_api->snprintf
#define sqlite3_step sqlite3_api->step
#define sqlite3_table_column_metadata sqlite3_api->table_column_metadata
#define sqlite3_thread_cleanup sqlite3_api->thread_cleanup
#define sqlite3_total_changes sqlite3_api->total_changes
#define sqlite3_trace sqlite3_api->trace
#ifndef SQLITE_OMIT_DEPRECATED
#define sqlite3_transfer_bindings sqlite3_api->transfer_bindings
#endif
#define sqlite3_update_hook sqlite3_api->update_hook
#define sqlite3_user_data sqlite3_api->user_data
#define sqlite3_value_blob sqlite3_api->value_blob
#define sqlite3_value_bytes sqlite3_api->value_bytes
#define sqlite3_value_bytes16 sqlite3_api->value_bytes16
#define sqlite3_value_double sqlite3_api->value_double
#define sqlite3_value_int sqlite3_api->value_int
#define sqlite3_value_int64 sqlite3_api->value_int64
#define sqlite3_value_numeric_type sqlite3_api->value_numeric_type
#define sqlite3_value_text sqlite3_api->value_text
#define sqlite3_value_text16 sqlite3_api->value_text16
#define sqlite3_value_text16be sqlite3_api->value_text16be
#define sqlite3_value_text16le sqlite3_api->value_text16le
#define sqlite3_value_type sqlite3_api->value_type
#define sqlite3_vmprintf sqlite3_api->vmprintf
#define sqlite3_overload_function sqlite3_api->overload_function
#define sqlite3_prepare_v2 sqlite3_api->prepare_v2
#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2
#define sqlite3_clear_bindings sqlite3_api->clear_bindings
#define sqlite3_bind_zeroblob sqlite3_api->bind_zeroblob
#define sqlite3_blob_bytes sqlite3_api->blob_bytes
#define sqlite3_blob_close sqlite3_api->blob_close
#define sqlite3_blob_open sqlite3_api->blob_open
#define sqlite3_blob_read sqlite3_api->blob_read
#define sqlite3_blob_write sqlite3_api->blob_write
#define sqlite3_create_collation_v2 sqlite3_api->create_collation_v2
#define sqlite3_file_control sqlite3_api->file_control
#define sqlite3_memory_highwater sqlite3_api->memory_highwater
#define sqlite3_memory_used sqlite3_api->memory_used
#define sqlite3_mutex_alloc sqlite3_api->mutex_alloc
#define sqlite3_mutex_enter sqlite3_api->mutex_enter
#define sqlite3_mutex_free sqlite3_api->mutex_free
#define sqlite3_mutex_leave sqlite3_api->mutex_leave
#define sqlite3_mutex_try sqlite3_api->mutex_try
#define sqlite3_open_v2 sqlite3_api->open_v2
#define sqlite3_release_memory sqlite3_api->release_memory
#define sqlite3_result_error_nomem sqlite3_api->result_error_nomem
#define sqlite3_result_error_toobig sqlite3_api->result_error_toobig
#define sqlite3_sleep sqlite3_api->sleep
#define sqlite3_soft_heap_limit sqlite3_api->soft_heap_limit
#define sqlite3_vfs_find sqlite3_api->vfs_find
#define sqlite3_vfs_register sqlite3_api->vfs_register
#define sqlite3_vfs_unregister sqlite3_api->vfs_unregister
#define sqlite3_threadsafe sqlite3_api->xthreadsafe
#define sqlite3_result_zeroblob sqlite3_api->result_zeroblob
#define sqlite3_result_error_code sqlite3_api->result_error_code
#define sqlite3_test_control sqlite3_api->test_control
#define sqlite3_randomness sqlite3_api->randomness
#define sqlite3_context_db_handle sqlite3_api->context_db_handle
#define sqlite3_extended_result_codes sqlite3_api->extended_result_codes
#define sqlite3_limit sqlite3_api->limit
#define sqlite3_next_stmt sqlite3_api->next_stmt
#define sqlite3_sql sqlite3_api->sql
#define sqlite3_status sqlite3_api->status
#endif /* SQLITE_CORE */
#define SQLITE_EXTENSION_INIT1 const sqlite3_api_routines *sqlite3_api = 0;
#define SQLITE_EXTENSION_INIT2(v) sqlite3_api = v;
#endif /* _SQLITE3EXT_H_ */