Vita CFW installer (patched for devkits)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Bluzume ebc6257e73
Fix for henkeks
2 years ago
installer Fix for henkeks 2 years ago
.gitignore Initial release. 5 years ago
LICENSE Initial release. 5 years ago
Makefile Fix Makefile clean function 5 years ago
README.md Update README.md 3 years ago
fat.tpl Initial release. 5 years ago
first Fix for henkeks 2 years ago
first.c Initial release. 5 years ago
first.x Initial release. 5 years ago
gen.py Initial release. 5 years ago
logo.h Initial release. 5 years ago
nsbl.h Initial release. 5 years ago
second Fix for henkeks 2 years ago
second.c Initial release. 5 years ago
second.x Initial release. 5 years ago

README.md

Modded version of enso to add support for 03.600.31 DevKit and TestKit firmwares.

Building:

You need vitasdk.

  1. make the payload
  2. Copy fat.bin to installer/res
  3. CMake the installer mkdir build && cd build && cmake .. && make

Firmware specific offsets are in first.c and nsbl.h. Logo is raw framebuffer data gzipped. If you make this too big (bigger than original logo size), you WILL perma-brick your Vita.

The source is for advanced users only. Users should download the prebuilt package. If something goes wrong, you WILL perma-brick your Vita. There is no recovery, even if you have a hardware mod. The only possible recovery is if you have a hardware mod and you dump the eMMC before getting bricked, then you can restore the dump. Dumps are device-specific and encrypted with a device-specific key.

Again, even if you just change the logo, there's a good chance you will perma-brick your Vita. You have been warned.